Your item succesfully added on your shopping basket

With handle extension

Hover over the above image for a close up image

  • With handle extensionWith handle extension
  • DimensionsDimensions

Zedlock S25Euro

£45.99 (+VAT)

In stock

Part No:

S25EURO

Now available with high quality ISEO Euro Cylinders

For metal gates with a 25 x 50mm (1" x 2") frame at the slam end.

Heavy duty lock case and Stainless Steel sliding bolt with 70mm throw. Easy retrofit on spring bolt and sliding bolt gates.

Models supplied with Euro Cylinder come with three keys. Additional keys can be cut at most key cutting centres.

Straightforward to fit; self-adhesive template & instructions included.

Compatible with Bateman Cattleyard; Century; Ashcombe and Half Mesh gates, and IAE Asbourne Plus. National Box End, Big Bar Plus, Five Rail Half Mesh and Eight Rail Premier. Check the gap between the inside of the frame and the flat bar - if it's more than 102mm/4 inches you will need to either cut the flat bar off, or fit a handle extension. Handle extension will be required for Bateman gates.

A 22mm hole cutter is required during fitting - available as an option below.

Fitting your own Euro Cylinder: The S25Euro is designed for 30/30 cylinders; 35/35 cylinders can be fitted but will project 5mm on each side.

Keyed-to-differ cylinders are supplied with three keys per cylinder. Keyed-alike batches are supplied with two keys per cylinder.

* Required Fields